It's been a few weeks since I did a full on balls-out detail on a car (interior, exterior, and engine bay). I thought I was rusty. However, after today I still think I have the skills to do some real good work. Did a 1998 Black on Black BMW Z3 today. The car wasn't in that bad of shape considering it has OVER 120K ON THE CLOCK!!!
Process:
Interior:
Vaccum X3 or 4 I don't remember
Windows with Stoner Invisible Glass
Seats cleaned with Blue Magic Leather/Vinyl Cleaner
Seats condition with Lexol Leather Conditioner
Carpets Shampoo'd with Wolfgang Fabric cleaner
Dash and trim cleaned with Meg's Interior Detailer
Nail brush to "comb" the carpets
Door jams with Meg's Instant Detailer
Various brushes and MF towels
Engine Bay:
Degrease with PP cut down with 5 parts water
Scrub while applying water
Dry with towels
Dress with Armor All
Various brushes
Mothers Aluminum polish on Manifold and Vavle Cover applied with a copper brush
Exterior:
Muffler primed with rusty metal primer then painted with high heat flat black
Muffler-tip wetsanded with 1500 then polished with Mothers Aluminum Polish
Wheels with Eagle One wheel and Tire cleaner with Schmitt mitt, tire brush, and Carrand Wheel Brush
Wheel wheels with PP cut down by 5 parts water, Carrand Wheel-liner brush
Wash with Meg's Gold Class Shampoo, MF wash mit, Foam Gun
Clay with Griots Clay and Meg's ID
Pinnacle XMT#3 applied via PC7424 on speed 5.5 with Lake Country CCS orange
3M Finnesse-It 2 applied via PC7424 on speed 6 with Lake Country CCS white
Menzerna Finishing Glaze (PO115CG) applied via PC7424 with Lake Country CCS blue
Top Cleaned with Nail Brush and Wolfgang Fabric Cleaner
1 coat of Pinnacle Signature Series II Paste wax applied by hand to entire car
1 coat of Pinnacle Souveran to Hood and Trunk Lid applied by hand
Wheels dressed with Meg's Endurance Tire Shine (purple)
Wheel-wells dressed with Armor All
Microfibers
Befores:
Linear Mode
