Rims/Tires/Wells:
Rims were rinsed, sprayed down w/Meg's Wheel brite, agitated with sponge. Used nut brush for lug nuts. They got QD wipe down when dried.
Tires rinsed, applied Awesome APC and agitated w/black schmitt, dressed w/D2G dressing
Wells rinsed, applied Awesome APC, agitated w/black schmitt and then dressed w/AA tire foam
Wash Process:
Rinsed, the pre-treated front end and lower panels w/Awesome APC
Washed w/Mitt and GG bucket, after washing section, went back and clayed w/mix of RL medium duty clay and poly clay (mixture makes heavier clay more pliable)
Re-foamed, let dwell for a few minutes and rinsed off
Dried w/various drying towels, blew out all cracks
Interior:
Vaccuumed, followed by complete interior wipe down w/Meg's APC, mf's and various brushes.
All interior was treated w/PB natural look and then wiped down to matte finish w/mf
Heated up water extractor and all carpets and floor mats were treated w/mix of ## lightening extractor solution/folex, worked in w/brush
Carpets and seats extracted then heater turned on to allow for ample drying
Paint Protection:
Applied D2G version of AIO via Flex and orange Flex groove pad, used XMT pad conditioner
buffed off w/various mf's
Went back w/mf and QD'd out cracks and any missing spots
All trim dressed w/D2G dressing
Others:
Windows cleaned SIG via cobra WW, interior sprayed with ## odor neutralizer
Interior Pics coming up...
...Sweet job...You really turn around the interior...
Linear Mode
