I did a detail on this maroon Ram 1500 , that needed some wet sanding in some spots because of previous paint work done to it. I sanded with 1500 followed by 2000 after which i decided to use my 3M polishes, the new perfect-i
t
3000 line. I used my edge blue pad with the swirl remover and the edge white pad with the final polish. Then topped it off with Collinite 845 to give him some durability. With my luck this was done on the one day that we had a cold front come through , resulting in no sun whatsoever. The pics don't
show major paint reflection but that's the best i could do.
some before, half sanded
same panel after
orange peel on the door
After sanding
door after
Linear Mode
