Wish This was a Quickie, 2007 Ford F-150 Supercab
Show N' ShineDiscuss Wish This was a Quickie, 2007 Ford F-150 Supercab in the Auto Detailing Forums forums; Got this one on Saturday to do:
My process was wash with 2 bucket method and did some serious claying (...
Got this one on Saturday to do:
My process was wash with 2 bucket method and did some serious claying (over 1 Hr and 2 bars too).
After claying check to see how many bad little swirls were on it and it was many. Broke out the UDM and use SIP with a orange LC CCS pad and then a with white pad and the swirls were gone, finish up with 106FF white LC CCS pad and then 50/50 to check if anybody wanted to return (none).
From there it got another wash and dry and my LSP of choice was Opti-seal X 2.
Interior was only vac and wipe down because the owner wanted that way.
Glass clean with Stoners and tire's dress with RL Tire and trim dressing and chrome all done with RL Chrome and Glass polish cleaner.
Wells was not done as per the owner (construction site truck)........
Hope everyone have a Happy Christmas with your family and friends too...............Angelo.......................... ................
Re: Wish This was a Quickie, 2007 Ford F-150 Supercab
Very nice write up and detail.
Love your process and equipment used.
If you want to bring the UDM to life with Menzerna, get some 5.25 low profile pads.......orange especially. It makes it seem like you're using a freaking mini rotary!
Re: Wish This was a Quickie, 2007 Ford F-150 Supercab
Thank you everyone for your great comments and for justin i use a 4" pad for minor scratch's and it work great. Might have to get some of those low profile ones soon. Had 2 but their are history. Thanks everyone!............
Carnauba is my way
Linear Mode
