Video: How to use the Cyclo Model 5-Pro Polisher to remove swirls

[Mike.Phillips@Autogeek]

Video: How to use the Cyclo Model 5-Pro Polisher to remove swirls

How to use the Cyclo Model 5-Pro Polisher to remove swirls
Here are some tips and techniques for using the Cyclo Model 5-Pro Polisher to remove swirls, scratches, oxidation and water spots.

Plus this video goes over,

How to chemically strip paint and inspect paint

Why to fold your towel 4 ways before wiping paint

How to do The Final Wipe

How to slice-up a car or divide large panels into smaller sections

Explanation as to why you must only work small sections at a time

How to do a Test Spot

How to prime a pad

How to inspect using a Brinkmann Swirl Finder Light

How to do a Section Pass

The most important tip - Don't lift the polisher off the paint until the pads stop spinning

Covers using the least aggressive product to get the job done approach

Machine Waxing with the Cyclo Polisher

The new Model 5 Pro Series is on the left with the blue grip...



Except for the blue grip and the variable speed dial they appear to be identical...




The variable Speed Dial is just down and to the right of the on/off switch...






Here's my son Rand demonstrating how to use the Cyclo Model 5-Pro Polisher





On Autogeek.net

Cyclo Orbital Polisher Model 5-Pro

Foam Pads, Brushes and Accessories for the Cyclo Polisher




Videos on Two Guys Garage

Cyclo Polisher Techniques as seen on The Speed...

Cyclo Polisher - How to remove swirls with XMT...

What's in Autogeek's Garage TV Show Commercial

Cyclo Polisher Commercial with Mike Phillips -...