Search:

I have a ‘22 F150 with pearl metallic paint, and the truck sits outside full time in Phoenix. The paint is still in excellent condition, and I’d like to try and keep it that way. I don’t intend to...

thank you Mike. Yes, it’s the discoloration just below the body line in the center. I was kind of figuring it was staining on the clear. Any recommendations on how to remove the stripes on the...

that makes sense. Trying to decide whether to tackle the other side with the lacquer thinner, or wait and see what happens. If i tape off the area on the other side; will the lacquer thinner pierce...

I have a white 2018 Escalade with brown/black pin stripes painted down the side of the vehicle. After researching removal techniques, i decided to try the lacquer thinner, and was able to...

Hey guys,

I have a pretty new '15 Yukon and noticed some deformities in the paint and plastic bumper cover. Took it to the dealer and they agreed that it was a manufacturing defect and agreed to...

Thanks guys! Appreciate he info!

I recently picked up the '28 Ford below. The paint appears to be in very good shape, however I'm curious what precautions to take when polishing/waxing a custom paint job that I have little...

Just wanted to provide a follow up. I finally finished the 4Runner and the swirls are 95% gone. It really looks like a new vehicle.

What would you guys recommend as a topper/wax? Anything? I...

Is this pressure washer still available, and does anyone know the price? I'm not finding it on costco.com

I was doing some reading tonight, and the reviews I've read on costcos site all seem to be positive for the CR Spotless Rolling De-ionized Water Filtration System.

AG appears to also sell the...

just for some general guidance...how much product do you guys generally use per section of the vehicle?

If i put an X or swirly pattern of the ol Swirl remover on a foam pad, is that typically...

Thanks guys. The Griots DA kit I ordered came with a CCS orange, white and blue pad, and the Wolfgang twins.

I'm thinking that I will start with the white pad, and Wolfgang TSR 3.0. Think that's...

It's a 2012 Toyota 4Runner Limited, black (non-metallic)

I've been reading the same thing on here about opti-coat. How can i verify if my particular paint code is Single Stage or not??

I believe the paint on my truck is single stage. Given the Wolfgang trio i'm going with, is there anything else i should add to this mix for the single stage paint? Or, will the WG 3.0 trio do the...

Are all new non-metallic Toyota paints single stage??

Thanks for the insight. One of the things i was most concerned about was harming the new paint, or making matters worse. Based on what i've read, the Griot's unit i selected is near dummy proof, or...

Sounds like a plan. I just ordered up the Griots Gen 3, with one orange, white and blue CCS pads along with the Wolfgang trio.

Once i get everything ready, i'm going to do a test section and will...

I think i'm going to go with this kit, since it seems to include nearly all of what i'm looking for, at a discount.

Griot’s Garage Random Orbital Wolfgang Duo

Should i add the Wolfgang Deep...

Thanks again. I've been reading up on pads, and am trying to determine which is going to be best to start with?

It sounds like I should pickup a 5.5"-6.5" white and red foam pad, and maybe an...

Thank you both for the response.

I think i'll go with the Griots Gen 3, and will pick up a variety of pads and the Wolfgang polishes/swirl remover.

Since i'll be working on a larger vehicle,...

I recently picked up a nearly new, black 2012 Toyota 4Runner Limited, which was owned by an older couple first before being traded in after a few months. They must've run it through a car wash a few...