Search:

if you talk to a shop that sells the vinyl for doing signs they have a citrus based cleaner for removing the old glue. i have used it after removing old signs on trucks and it worked good and smelled...

depends if your counting just 1 picture or 2 if both are separete the total i guess is 1968

I just did my vw rims that where clear coated. They where scratched up real good so i had to remove the clear coat if you look under my name in the gallery and in the sanding and buffing section...

i had a chevy signal light like that.i took the bulb out and used a dry bottle brush to loosen the white powder on the inside then blew it out with air. it actually turned out good all the haze was...

go to the gallery here and do a search for rims my name will be on them

i just did a set of rims that were painted and all scratched up now there a polished aluminum they turned out good i used the wolf gang kit. if you want to see photos of them i did a how to fix...

about 6 hours.

thanks they did turn out good. some of the scratches were about 2 mills deep.if you want to see the bigger photos go into gallery here

http://www.autogeekonline.net/gallery/data/500/thumbs/before_32.JPGhttp://www.autogeekonline.net/gallery/data/500/thumbs/before13.JPG
before
this is the pics in order of process....

I just got a 06 jetta 2 months ago all the rims are scratched from hitting curbs. I just put on winter tires and steel rims so im going to try to fix these aluminum rims.
Items i used are
Wolfgang...

Tow truck driver.Rebuild old cars and paint them on the side.Thats what got me into detailing so i could rekindle that old paint when posible.i also built the kit of the lambo in my avatar did...

try our weather out at -37 and about a foot of snow here in alberta canada.

was this car done with new panels or is there some fillers used to repair rust or dents

i have a car with this self healing scratch resistant type paint i wont be using it again. i have been trying different pads and product. what i found to work for me is the sirbuff pads and menzerna...

thanks for the info

friends have some tree sap on there camaro and chev 1500. Just wondering what is recomended to remove it.

Enter me please

there are some portable compressors that are rated for continous run believe dewalt has one. a friend has one he uses on a construction site and he loves it

thanks its the only way i can afford one

never took offence. all sugestions are appreciated. never know if it was something i did wrong or not. will post some pics when i start my sand and buff of the process.

ive allways sanded the primer with 400,600 then 800 grit never had a problem with the cheap line of ppg witch is omni just didnt last real long.

yes its a kit took 3.5 years to build.

with the product.clear ended up real haze and some paint didnt stick to the primer properly.i was thinking sikens mybe dupont.

i had some bad experience with ppg. im going to check out some different brands.

if your just trying to flatten it use 2500 grit wet and dry sandpaper cut to fit the end of a pencil eraser and glued on. just spin it on top of the marks. this work for me on my chev wasnt to...

yes its a diablo lambo. the paint is the same brand as the clear.sherwin williams paint.