Rotary Pad question

[FMINUS]

I have switched to the rotary!!!

ITs not as hard as I thought it was, as long as you pay attention. Orngez showed me the way!!!

I was using Blue and Orange Edge pads to polish a car. The blue pad was fine but I kind of had to fight the orange pad at times.

My question is this, how do you guys combat this problem? I was thinking about using my Edge Wave pads or switching to wool.

[sparkie]

I want to know the same thing...Thinking about going to LC for my rotary....

[Rey05]

I still haven't found a way to control the foam pads well. I found if the pad is well lubricated it helps. It is still difficult on areas like the roof, that's why I like the wool pads the best but obviously they can't be used for everything...

[detailgod]

switch to the wools. easier to control. only foam you would need is a finishing foam pad. but with practice you can finish down with wool and not have to use foam

[sparkie]

Originally Posted by detailgod

switch to the wools. easier to control. only foam you would need is a finishing foam pad. but with practice you can finish down with wool and not have to use foam

Dose Edge make a wool pad for 2K?

[D&D Auto Detailing]

Originally Posted by sparkie

Dose Edge make a wool pad for 2K?

No. The Edge 2000 PLUS 8 Inch Wool Buffing Pads

[detailgod]

Originally Posted by sparkie

Dose Edge make a wool pad for 2K?

yes they do. thats what i have black green and blue edge 2k wool



thats them in the pic

[Jimmie]

Originally Posted by sparkie

Dose Edge make a wool pad for 2K?

Yeah, I think these are them Sparkie.

The Edge 2000 PLUS 8 Inch Wool Buffing Pads

[Sevenrd]

Originally Posted by detailgod

switch to the wools. easier to control. only foam you would need is a finishing foam pad. but with practice you can finish down with wool and not have to use foam

I agree with this. Wool's much easier to work with.

[detailgod]

[quote=Sevenrd]I agree with this. Wool's much easier to work with.[/


wool gets job done faster and does not build as much heat as foam. burn paint faster with foam. especially when using rotary