Speed of PC

[ben91teg]

What is a good speed to apply polish and glazes? I start slow like 1500 and speed up around 4 or so. Is that the correct way to do it?

[Mike T]

Generally I'd say 1 to 3 for glazes and 4 to 6 for polishes. Depends on what your goal for that polish is.

[BILL]

Originally Posted by Mike T

Generally I'd say 1 to 3 for glazes and 4 to 6 for polishes. Depends on what your goal for that polish is.

What would you say as far as O.P.S..... Orbits Per Second that number 1 would be??

number 3??

number 4??

number 6??

My guess 1=1500
2=2600
3=3500
4=4500
5=5500
6=7000 I KNOW WHO CARES......:-)

[killrwheels@autogeek]

highest speed 5.5-6 on PC for any polishing
3 on dial for glazes
1200-1800 max on rotaries polishing

[ben91teg]

Ok thanks for the info.

[dengood1]

Does anyone else notice that the PC doesn't increase speed from about 5 to 5.9, they when you hit 6 it hits a whole new speed? Almost doubles when I put in on 6.