I havent used Final Polish or Micro Polish (just SIP, 106FF, and PG). But IMO, Final Polish doesnt have enough gloss, and a little too much cut for a final polish. So if its between those two, then Id go with Micro Polish as my final polish. But Id still pick 106FF over both of those.
Remember, start with the least aggressive combo first and work your way up.
The reasons your swirls are coming back is probably because #1 you're doing it by hand, #2 the "polishes" you're using have fillers in them which are being washed away after a few washes. So you arent actually removing anything, you're just hiding imperfections. The Menzerna polishes, Optimum, XMT #1- 4, and PB SSR's dont have fillers. XMT 360 DOES, so you'll basically be getting the same results with that as you were with the Meguiars stuff.
Quote:
Originally Posted by dontsleeponit  edit: I just saw you wrote it has quite a bit of swirls, if this true your pics hide them very well because I dont see any! |
That car could be covered in swirls for all we know. But there are LSP's on the car, and the pictures were taken in the shade. Put it in direct sunlight or use halogens and the swirls will come out. Clay the car and you'll see even more.
Linear Mode
