Rotary... Help me pick

[ryandamartini]

Well I was doing my stepdads Lexus Sc400 yesterday for his birthday and it just kicked my ass.

The PC on a yellow pad with XMT3 didnt touch the swirls. It took three passes to see any change. The clear on the lex seemed to just reflect the XMT. I have never seen xmt3 dust like that. I figure with all the wonderful hard paints around I should start learning how to use a rotary.

Let me know your picks!

-Ryan

[Padron]

Did you try a 4" pad? I have a Hitachi rotary and love it...

[sparkie]

Originally Posted by ryandamartini

Well I was doing my stepdads Lexus Sc400 yesterday for his birthday and it just kicked my ass.

The PC on a yellow pad with XMT3 didnt touch the swirls. It took three passes to see any change. The clear on the lex seemed to just reflect the XMT. I have never seen xmt3 dust like that. I figure with all the wonderful hard paints around I should start learning how to use a rotary.

Let me know your picks!

-Ryan

I'm getting a rotary, don't know what kind. I think its a Christmas thing or something like that. I did talk about the yellow and green ones at AG. But the wifes daddy said he can get one, you know what I'm saying. The only thing is, I get the pads. One person said LC 6.5". But I really like my Edge pads on my PC. I wish more would chime in here and tell me cons and pros of their pads.

[justin30513]

I will be getting the Vector. It's a cheaper rotary. It's only 60.00! I've heard lots of good things about it. For 60 bucks how can you go wrong? A lot of well respected detailers I know have one and have used for over 3 years a piece.

PM me if you want a link.

[Sevenrd]

Originally Posted by Padron

Did you try a 4" pad? I have a Hitachi rotary and love it...

Another Hitachi owner here. Works great. No complaints.

I'm using the Edge 2000 pads with it and have great results.

[sparkie]

Originally Posted by Sevenrd

Another Hitachi owner here. Works great. No complaints.

I'm using the Edge 2000 pads with it and have great results.

The one we use on our PCs? DA pads?

[justin30513]

Originally Posted by sparkie

The one we use on our PCs? DA pads?

They have an 8" inch rotary system too. The same pads as our ShMitts.

[Al-53]

I have both ..A Makita and a Hitachi..and I like the Hitachi a little better...seems smoother and also has a 5 year warranty....also the Hitachi seems more balanced....I use my 6.5 " pads with them...you get more control..less hop...get into places better...I got no holograms with the 6.5 than the 7.5 or 8"s....alot of times with the bigger pads you tend to run on edge more than flat...

But my Hitachi is my go to buffer now...

AL

[William's_Detail]

Dewalt works good ...

[Juztang]

I just got a new Hitachi. I really like it so far. A lot lighter and quieter than the old Dewalt I had.