What do I do next?

[lempilot]

I am polishing my black 4runner with a pc, lake country orange, white, blue pads, manzerna 91E, and manzerna 85u. After the 85u I was planning on applying a coat of Klasse sealant topped with a pure carnuba. So far, I am working on the 91e phase and it is going well.

I have read several thread that talk about using an alcohol solution to remove any impurities. Should I apply the alcohol solution, if so, when? Should I top with Klasse and carnuaba? Any suggestions will be helpful.

[killrwheels@autogeek]

you can do an ISO wipe as wanted, I have personally seen no compatibility issue with Menzerna and more than a dozen sealants.

as far as topping goes, it is up to you what final look you want. I would use the Klasse and allow to cure for 12 hours. If you find it a bit sterile add a carnauba or spray wax of your choice.

remember with Klasse sealant to use the WOWO method. Wipe on and then off. As light as possible. I use a small travel size spray bottle and literally no more than two spritzes per panel.

[lempilot]

Thanks killerwheels. I did the following and I have a feeling there is a lot of overkill here, but better safe than sorry.

I used Manzerna IP, 85, 115, Klasse AIO, Klasse Sealant, Souveran. It looks great though