autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Newbie Member
    Join Date
    Jan 2014
    Location
    Auckland, NZ
    Posts
    10
    Post Thanks / Like

    How to get the metallic to sparkle?

    Hi there this is my first post but have been a member for a while.

    I have a BMW in sparkling graphite metallic that i have just detailed. I used a whole clay bar which was filthy when i finished with it. Poor car has probably never been detailed properly in its life.

    So after claying i compounded with turtle wax scratch and swirl remover then used mothers step 2 glaze and polish and then covered with collinite 845. Im a little disappointed as the car is clean pure reflection but the metallic is not sparkling.

    Just wondering should i have used a pure polish after the scratch and swirl correction?

    I have read collinite 915 is better for darker colours than 845. Would this make a difference? Collinite 845 of my previous iridium silver merc looked amazing so im surprised with the different result.

  2. #2
    Super Member conman1395's Avatar
    Join Date
    Nov 2013
    Location
    Kansas City, KS
    Posts
    1,622
    Post Thanks / Like

    Re: How to get the metallic to sparkle?

    I assume you're using a DA?
    Stop with the Turtle Wax and Mother's abrasives. Both those companies have some great products, but for abrasives go with Meguiar's.
    Former professional detailer. Current medical student (class of 2023)

    2017 Infiniti Q60 3.0t AWD

  3. #3
    Super Member
    Join Date
    Nov 2013
    Location
    Alexandria, VA USA
    Posts
    1,072
    Post Thanks / Like

    Re: How to get the metallic to sparkle?

    A glaze typically has fillers in it to temporarily hide imperfections. I think it may be preventing the metallic from popping as well. I would use a fine polish only after the compounding. I personally don't think the wax matters much.

  4. #4
    Newbie Member
    Join Date
    Jan 2014
    Location
    Auckland, NZ
    Posts
    10
    Post Thanks / Like

    Re: How to get the metallic to sparkle?

    Yes I am using a DA. I used the turtle wax as it was cheap and available where I am. I had a closer look at the mothers product and it says its a "sealer and glaze" so im guessing i havent actually polished the paint at all. I compounded it then went straight to sealer/glaze.

    What polish do you recommend? I see pinnacle is sold by autogeek as a recommended one.

    Also whats the best way to remove the wax? Or can I just start polishing and this will remove the wax?

  5. #5
    Super Member VISITOR's Avatar
    Join Date
    May 2007
    Posts
    9,723
    Post Thanks / Like

    Re: How to get the metallic to sparkle?

    if you want to stick to otc products, then pick up some megs UC and ultimate polish or swirlx instead. they will deliver better results and are formulated to be used with the DA. also (assuming you're new to DA machine polishing) is to move the polisher slowly and not tackle too big of an area which will not yield the desired results...

    here's one example on how slowly (not too fast) you should be going...
    [ame]www.youtube.com/watch?v=CAPN4I2Oo4o[/video]

    btw, he is using a GG6 and you can tell the amount of torque/power it has for those who are on the fence of purchasing one...
    i am the jump starter.

  6. #6
    Newbie Member
    Join Date
    Jan 2014
    Location
    Auckland, NZ
    Posts
    10
    Post Thanks / Like

    Re: How to get the metallic to sparkle?

    Megs is available locally. My car is scratch and swirl free now so i might go for a polish only.

    There is Megs ultimate polish and deep crystal polish. The ultimate polish says its designed for removing swirl marks, hazing, and light scratches. The deep crystal polish says: "Deep Crystal system Polish is a pure polish specially formulated for dark-coloured cars. The formula creates a dazzling, high gloss finish by conditioning and nourishing the paint, making dark colours darker and eliminating fine hairline scratches for perfect swirl-free reflections. It is that extra step necessary to create the ultimate, wet-look show car shine."

    So i should be better off with the deep crystal polish it seems.

  7. #7
    Super Member VISITOR's Avatar
    Join Date
    May 2007
    Posts
    9,723
    Post Thanks / Like

    Re: How to get the metallic to sparkle?

    get the ultimate polish or swirlx instead...

    Meguiars Swirl X Swirl Remover

    Meguiars Ultimate Polish
    i am the jump starter.

  8. #8
    Super Member Bill1234's Avatar
    Join Date
    Apr 2012
    Location
    New York, NY
    Posts
    2,647
    Post Thanks / Like

    Re: How to get the metallic to sparkle?

    If you compound you then need to polish as your finish will be hazy
    Bill 1234
    2004 audi a6 quattro (traded).
    2015 Ford Escape 2.0l ecoboost 4WD

  9. #9
    Super Member conman1395's Avatar
    Join Date
    Nov 2013
    Location
    Kansas City, KS
    Posts
    1,622
    Post Thanks / Like

    Re: How to get the metallic to sparkle?

    Quote Originally Posted by 959drew View Post
    Megs is available locally. My car is scratch and swirl free now so i might go for a polish only.

    There is Megs ultimate polish and deep crystal polish. The ultimate polish says its designed for removing swirl marks, hazing, and light scratches. The deep crystal polish says: "Deep Crystal system Polish is a pure polish specially formulated for dark-coloured cars. The formula creates a dazzling, high gloss finish by conditioning and nourishing the paint, making dark colours darker and eliminating fine hairline scratches for perfect swirl-free reflections. It is that extra step necessary to create the ultimate, wet-look show car shine."

    So i should be better off with the deep crystal polish it seems.
    No, get ultimate polish.

    What is this "pure polish" that your mentioning?
    The ultimate polish is a very fine polish.
    Former professional detailer. Current medical student (class of 2023)

    2017 Infiniti Q60 3.0t AWD

  10. #10
    Newbie Member
    Join Date
    Jan 2014
    Location
    Auckland, NZ
    Posts
    10
    Post Thanks / Like

    Re: How to get the metallic to sparkle?

    Quote Originally Posted by conman1395 View Post
    No, get ultimate polish.

    What is this "pure polish" that your mentioning?
    The ultimate polish is a very fine polish.
    http://www.meguiars.com/en/automotiv...system-polish/

Page 1 of 2 12 LastLast

Similar Threads

  1. A little sparkle for the 2013 volvo...
    By irvsmith in forum Show N' Shine
    Replies: 3
    Last Post: 10-07-2018, 02:25 PM
  2. Vw passat protected with tac system sparkle
    By SPIROS ANTONIOU in forum Show N' Shine
    Replies: 9
    Last Post: 02-19-2015, 09:14 AM
  3. Single Stage Metallic & Clearcoat Metallic --> Same Car
    By Mike Phillips in forum Ask your detailing questions!
    Replies: 6
    Last Post: 07-22-2014, 05:08 PM
  4. Replies: 28
    Last Post: 01-27-2014, 03:52 PM
  5. Metallic vs. non metallic paint
    By ricka in forum Auto Detailing 101
    Replies: 5
    Last Post: 06-25-2007, 06:08 PM

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» April 2024

S M T W T F S
31 1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 1234