Trying DP on Silver Ford Lightning

[02SLVRon22]

I have the following DP Products, and will be detailing my Silver Ford Lightning today:

Final Finishing Polish
Permium Surface Shield
Spray Surface Shield
Final Gloss Booster
Max Wax

The vehicle was cleaned using the Foam Gun, and was recently clayed. Which of these products would you suggest?

I currently have 1ZMP and UPP, but want to try something different.

Thanks in advance

[killrwheels@autogeek]

I would use the Finishing Polish followed by a coat of the Surface Shield. Allow to cure for 12-24 hours (no water) and then consider a coat of Spray Shield if needed for addtl layer of protection.

You can use the Gloss Booster over the Surface Shield after curing (if you dont use the spray shield) the next morning, or wait another 12-24 hours after the second layer.

Then if you feel you dont have enough gloss and depth, then consider a coat of Max Wax. It might not be needed currently with the above regimine and you might wanna try it after a couple of weeks of just the sealant and gloss booster.

I would also suggest continuing to use the gloss spray after each wash inbetween detailing sessions. It seems to add some addtl WOW to a just cleaned finish.