Cyclo Dual Head Polisher or the UDM

**ZoranC** · 09-21-2007, 02:20 PM

Originally Posted by TOGWT

I tried to compare apples with apples, if you put a rotary in the mix it is matchless for paint correction / renovation. The Cyclo /PC / UDM were not made (or IMO successfully adapted ) to do that type of work

Right now rotary is the king of heavy paint correction / renovation just because other machines do not put emphasis on power but on safety and try to balance that. However, raise power/speed on Cyclo a bit, put slightly larger pads, and you are giving a rotary run for it's money while still staying safe, just like that Swedish unit is doing (too bad it is outrageously expensive). Such designs (with 3 heads) are being used to get perfect polish of stone.

**ZoranC** · 09-21-2007, 02:40 PM

Originally Posted by Nica

ZoranC - Not sure how you can do a full paint correction with a Cyclo?

By using it opposite of what almost everybody is saying how to use it. Almost everybody says use just the weight of the machine. That works for very fine final polish / paint cleaning but will not do paint correction. That is how I was too doing it for a while and was wondering why I do not seem to be able to take things out with it even though Cyclo rubs 4" pad very vigorously across the surface.

Then eventually I noticed sheet metal I work on with Cyclo seemed relatively cold so I started thinking. Cyclo's design seems to be very effective in not creating focused heat / helping disperse the heat. That is what makes it safe. That is also what is working against you when trying to achieve paint correction. Lack of heat indicates lack of sufficient pressure. That polish needs pressure to properly break down. I realized that handle on the front is not there for esthetical purposes only. So I created pressure, grabbed that handle and leaned onto it. Badda bing badda boom. Correcting like nothing. Taking rotary halograms out like nothing. Me very happy. Me very likey. And boy can that thing take tons of pressure and still keep spinning.

P.S. If you take a look at ScottWax's avatar on other site and pay attention to muscles in his arm you will notice he is pressing his Cyclo down through that handle.

**lcocanougher** · 09-21-2007, 05:10 PM

i have a UDM and love it. cyclo two heads, means two pads to change everytime when you can get the small pads for the UDM. Also I read about people having trouble breaking down opti polish with pc, let me tell you, the UDM will break it down like nothing and i use speed 4, vibration isnt bad either. Also i am new to this forum and would like to say "you guys are all great" i am addicted to this site!

**ZoranC** · 09-21-2007, 06:56 PM

Originally Posted by lcocanougher

cyclo two heads, means two pads to change everytime when you can get the small pads for the UDM.

I do not understand what are you presenting as cons here. Could you please clarify?

**smwalker** · 08-01-2008, 11:57 AM

Originally Posted by Junebug

I have a PC and a makita - and I've seen the UDM in action first hand. From my experience and from reading tons of posts from users on other Forums - I believe there is a place for all types of machines. IF, price is not a big issue, I would get the Cyclo, it's hard to beat a 54 year proven record and I've never heard any complaints about it, those that have a PC and a Cyclo will tell you there's simply no comparison. That said, I'm going to be getting a Cyclo as soon as I can.

Uses twice as many pads, clean up is time 2. Some folks have money to burn I guess.

**smwalker** · 08-01-2008, 12:27 PM

Originally Posted by ZoranC

From your comment I would assume you never had one or used one for longer period of time. I have one (had it for years) and I am still (I have practically every other machine on the market too) absolutely in love with it, warts and all.

Yes, twice as many pads. But twice cheaper pads. Yes, cleaning two pads instead of one. But twice smaller pad. So I don't see your point.

Not being argumentative but my neighbor has one and he showed me how it worked on my sons car (Just did a door). I found it bulky (on door) and the pads were pretty hard (don't know if this is normal or not). I can't say I know how much those pads cost so if it is half the price of a normal pad then I miss spoke. If it is more than half then I don't see the extra money. Perhaps I am cheaper than most. I think I was right about the clean up, cleaning twice as many pads is twice as many. That is unless you throw the old pads away. I am glad you enjoy your machine and meant no offense Cyclo owners. I am just waiting for a 7424. Santa should bring it at Christmas time.