Show N’ Shine Contest (September)

[AL417]

April ’07 - ’85 MR2

Products used: XMT 4, XMT2, XMT 1, WDG Spritz Sealant
And Souveran Paste

Before






XMT4 with a yellow Edge pad made a tremendous change in the paint.

XMT3/Green Edge

XMT2/Orange Edge

XMT1/Blue Edge


At this point I started to work on the other side of the hood and decided to
go from XMT4 to XMT2 and then XMT1 on the rest of the car.

After
XMT series, Wolfgang Deep Gloss Spritz Sealant x 2, Souveran Paste x 2

[AL417]

5 Months Later – Sept. ‘07

Polish –XMT360 with Orange Low Profile pad on the UDM
Glaze – XMT Finishing Glaze
Wax – XMT180 x2 by Hand

Before






During
50/50

Almost There

1/3 Done


After

[OCDetails]

This was one of my project vehicles for the 2007 OCDetails Spring Cleaning Event. I didn't get too many pictures of this one because I had someone else taking the pictures. You can see the change on this fender though. The left side is before and the right side is after XMT 360. It was done with a green Edge 2000 pad on Dwayne's recomendation.





We got the pad nice and red on this one.



Of course, with this many people working on it, we only took about 3 minutes to do the whole truck. lol

[6LS2]

Pinnacle XMT # 3
Pinnacle XMT # 1
Pinnacle XMT 360

[Meghan]

Going to pick a winner tonight, so if you have not posted yet, do so!

[littlemissGTO]

Hmm ok. I'll throw my hat into the ring.
Pontiac GTO Impluse Blue Metallic
Wash
Clay
Vacuum
Wipe down interior with Z10 and Mother's back to black
Sprayed wheels, tires,and wheel wells with PB's APC
PB's SSR2.5 w/orange pad @ speed 5
PB's SSR1 w/white pad @ speed 5
PB's EX w/Blue pad @ speed 3. Removed w/MF
Tires dressed w/Z16
Then I ran out of daylight. Monday I'll get a coat of Natty's Blue done.
On with the pics
Before:




The spoiler met the garage door:

After washing and claying:


Passenger's Fender after PB's SSR2.5 and SSR1:

Quarter 50/50 shot:

Finito shots:

[6LS2]

I did some wetsanding on my sisters car over the weekend. I used 2000 gritt sand paper. After sandiing, I tried XMT #3 with a Yellow LC CCS Pad on my PC, I had a feeling it would've have done much, but look at this! This is only after one pass, sanding marks are pretty much all gone! Didn't even need XMT #4. The more I use XMT the more I love it!





After XMT #3

[6LS2]

[Meghan]

Ok this was the hardest one we have had to pick a winner for, everyone emailed me their vote this morning and everyone picked a different person! So that tells me you all did a heck of a job! So I had to ask for two votes per employee so I could add them up and see who got the most... still it was only off by one. So we have a winner, but I really feel like at least five of your should have won! So please do not take this one personal, everyone had great shots and did a wonderful job. Unfortunately I can only pick one so the one that had ONE vote more than everyone else was.... 6LS2

[AL417]

Congratulations 6LS2! Nice job.