Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Re: Good Microfiber Pads?
Originally Posted by rwright
If you're using a Rupes with a 5" backing plate, call Kevin Brown and order a custom cut backing plate to fit the DMC/DMF 5
This x 1000
Carolina`s Finest Detailing - Charlotte areas preferred CQuartz Finest Reserve & GTECHNIQ Crystal Serum Ultra coating center. STEK/Suntek PPF
www.Carolinasfinestdetailing.me
-
Re: Good Microfiber Pads?
HAs anyobody used 4" Buff and Shine microfiber pads with Rupes Mini? There is like 7-8mm overhang per side, i wonder is that too much or still ok for mini?
-
Re: Good Microfiber Pads?
Originally Posted by Ballistic
Getting ready to order some new pads, and wanted to know what everyone is using.
I have been using the Rupes Microfiber Pads, but been hearing good things about the Meguiars pads.
Anyway whats everyone using?
megs pads are good and last pretty long.optimum pads delamination problems after 4 uses.
-
Super Member
Re: Good Microfiber Pads?
-
Good Microfiber Pads?
Originally Posted by Joel1979
HAs anyobody used 4" Buff and Shine microfiber pads with Rupes Mini? There is like 7-8mm overhang per side, i wonder is that too much or still ok for mini?
I have. They're too big for the mini.
Sent from my iPhone using Autogeekonline mobile app
-
Re: Good Microfiber Pads?
Originally Posted by WRAPT C5Z06
Too bad, they are great pads. Not lots of options for good mf pads for mini here in europe.
-
Regular Member
Re: Good Microfiber Pads?
Originally Posted by Joel1979
Too bad, they are great pads. Not lots of options for good mf pads for mini here in europe.
I have been using the 4" B&S MF pads on the Mini,
they do work, even with the overhang. The thing to
watch out for is heat build up, a few worked great then
1 oddball overheated, deformed out and around the BP.
I ordered up some Griot's Boss 3" MF pads, which will
be my goto from here, they are just that perfect for
the Mini. Small center hole for heat, thick quality MF,
doesn't mat down too fast.
Here are my picks of MF pads that I've tried on the Mini
Griot's Boss 3" with center hole
Lake Country 3" MF
Carpro, 3" with center hole
Hope this helps
Sent from my KFFOWI using Tapatalk
-
Re: Good Microfiber Pads?
I think i might try 4" bns and make a center hole like i have done to my megs mf discs.
-
Re: Good Microfiber Pads?
I use Lake Countries MF pads. They are very durable and easy to clean. I just brush them off when I'm done and throw them in the wash with my detailing towels. Once washed i leave it out to air dry... come out like new every time. Highly recommend these!!
Similar Threads
-
By Mike Phillips in forum How to articles
Replies: 4
Last Post: 01-28-2021, 09:47 AM
-
By coupe07 in forum Wool & Foam Buffing Pads
Replies: 4
Last Post: 05-15-2015, 08:21 PM
-
By DP 08 GXP in forum Wet-Sanding, Cutting & Buffing
Replies: 3
Last Post: 09-11-2013, 07:40 AM
-
By jamores23 in forum Auto Detailing 101
Replies: 3
Last Post: 05-24-2012, 06:33 PM
-
By SalFoges in forum Auto Detailing 101
Replies: 12
Last Post: 04-21-2012, 06:49 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks