Pro Blend Bottle Propertioner 128oz Problem...

[Damnhor2]

Hey guys, I got a problem.
I just got my Pro Blend 128 oz, and I just can't seem to get it to work.
I fit it onto my DP Xtreme Foam Shampoo, But when I squeeze the bottle the fluid just won't
go up...
If I squeeze really really hard then I get a little but no go...
Am I doing something wrong?, maybe the shampoo is too thick for the pro blend?

Need Help!!!

[loudog2]

I think the shampoo is too thick. I've never heard of it used for shampoo. Just concentrated cleaning solutions which are watery.

[supercharged]

it's too thick. You should get a dispensing pump for this. ADS carries those.

[Mike.Phillips@Autogeek]

I'll test this out tomorrow as a way of troubleshooting for the future...

I think ADS does carry the pumps be we carry them also...

Gallon Pump, Gallon Pump Dispenser, Gallon Bottle Pump

[tenorplayer23]

Just an FYI, while it seems simple, just make sure that the tube from the proportioner doesn't bottom out on the base of the bottle. May cause obstructed flow. I purchased one each for a 32oz and 128oz bottles (the former being Optimum Car Wash) and had a similar problem. This was just as the weather turned and I didn't pursue the solution, but I think the bottle proportioner does touch the bottom of that particular Optimum bottle. Just a thought....haven't fixed mine yet (may or may not be the cause).

See ya.