» Autogeek Car Care Products | | |  | | 
09-22-2007, 06:10 AM
|  | Senior Member | | Join Date: Jan 2007 Location: Chula Vista, California
Posts: 3,280
| | | Wolfgang DGPS question For Wolfgang DGPS, it says to let cure for 12 hours. It's not necessary to wait 24 hours then, right? THanks in advance!  I like these new smileys! | 
09-22-2007, 06:38 AM
|  | Senior Member | | Join Date: Nov 2006 Location: South Florida
Posts: 3,718
| | | I was told it should cure for at least 12 hours. I usually wait 24 hours. Some people have said the product is not that durable. I think the durability factor might relate to the cure time. I have found the product to be quite durable and it looks great. It's one of my favorite products. | 
09-22-2007, 07:02 AM
|  | 24 HR Queue | | Join Date: May 2006 Location: Blue Ridge GA (The Mtns.)
Posts: 2,816
| | | I used it on my wife's van after polishing with 106. I know that it cured for at least 10 hours in the daylight since I did it in the morning. I got 3 months visible durability out of it. Pretty nice looks too. | 
09-22-2007, 08:03 AM
|  | Moderator | | Join Date: Mar 2006 Location: South Florida
Posts: 10,086
| | | most sealants should see 8-12 hours of curing outside of water when possible. It is for the best durability. That said, I have topped several after 4 hours with no issues personally. Got do as time permits ! | 
09-22-2007, 08:39 AM
| | Junior Member | | Join Date: Sep 2006
Posts: 20
| | | New Car Advice Don't do a lot of detailing other than the "garage queen" I have all the pinnacle product line and like the Klasse twins. Need advive on how to proceed on a new car (1 day old) Car will be outside 24/7 and winter is on the way.
Many thanks | 
09-22-2007, 08:45 AM
|  | Moderator | | Join Date: Mar 2006 Location: South Florida
Posts: 10,086
| | Quote:
Originally Posted by overthehill Don't do a lot of detailing other than the "garage queen" I have all the pinnacle product line and like the Klasse twins. Need advive on how to proceed on a new car (1 day old) Car will be outside 24/7 and winter is on the way.
Many thanks |
Klasse twins with a pinnacle topper should easily get you thru the winter. I still suggest washing --- claying --- polishing ---protecting as possible. If no appreciable swirls then paint cleansing (Klasse AIO) versus polishing will likely surfice. | 
09-22-2007, 08:45 AM
|  | Moderator | | Join Date: Mar 2006 Location: South Florida
Posts: 10,086
| | Quote:
Originally Posted by overthehill Don't do a lot of detailing other than the "garage queen" I have all the pinnacle product line and like the Klasse twins. Need advive on how to proceed on a new car (1 day old) Car will be outside 24/7 and winter is on the way.
Many thanks |
Klasse twins with a pinnacle topper should easily get you thru the winter. I still suggest washing --- claying --- polishing ---protecting as possible. If no appreciable swirls then paint cleansing (Klasse AIO) versus polishing will likely surfice. | 
09-22-2007, 09:27 AM
|  | Senior Member | | Join Date: Mar 2006 Location: Dallas, TX
Posts: 1,985
| | Klumzy, I'd let it cure the 12 hours. When I put it on my car I let it sit in the garage overnight and then applied a second coat again letting it sit overnight. It made it rather inconvenient to apply but the results were great and it lasted for several months. WDGS is an excellent product. The only downside is the wait time. 
__________________ _____________________________________ 2003 Jaguar S-Type V8
2001 Nissan Quest SE
2000 Nissan Frontier XE
"Dogs in cars again. Going away. Going away fast" - P.D. Eastman, Go, Dog. Go! | 
09-22-2007, 09:48 AM
|  | Senior Member | | Join Date: Mar 2006
Posts: 6,605
| | Quote:
Originally Posted by klumzypinoy For Wolfgang DGPS, it says to let cure for 12 hours. It's not necessary to wait 24 hours then, right? THanks in advance!  I like these new smileys! | 12 hours should be enough cure time for DGPS. Regions that have higher humidity will require up to 24 hours of cure time...Klasse SG defenetely needs 24 hours cure time for best durability.
__________________
1995 Nissan 240 SX SE green metallic (sold)
2000 Acura 3.2 TL white (sold)
2005 Acura RL Desert Mist (weekend toy)
1999 Infiniti I30t white (daily driver)
1997 Acura 3.2 TL (sold)
2004 BMW 325 Ci jet black(wife's car).
| 
09-22-2007, 02:39 PM
| | Senior Member | | Join Date: Jun 2007
Posts: 411
| | | gary26 How would you know if it didn't get the proper cure time. Would there be some sort of clouding when you waxed over it. Or would it just effect the durablilty of the sealant. I'm just trying to know what to look for. |  | | | Thread Tools | | | | Display Modes | Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | | » Popular Product Links | | | » November 2008 | | S | M | T | W | T | F | S | | 26 | 27 | 28 | 29 | 30 | 31 |
1
| |
2
|
3
|
4
|
5
|
6
|
7
|
8
| |
9
|
10
|
11
|
12
|
13
|
14
|
15
| |
16
|
17
|
18
|
19
|
20
|
21
|
22
| |
23
|
24
|
25
|
26
|
27
|
28
|
29
| |
30
| 1 | 2 | 3 | 4 | 5 | 6 | |
All times are GMT -5. The time now is 05:06 AM.