Help with buffing custom paint

[king air pilot]

Hello All,

I am doing a small cuatom paint job. I have wet sanded it to 1200 grit. I just recieved my Menzerna kit from AG. The intensive polish states it gets out 2000 grit scratches.I am really looking forward to trying out my new kit. Any thoughts on what to use between the 1200 grit and the intensive polish.

Thanks
Mike

[budman3]

Use 2000 grit ... or higher grit.

It's going to be very hard to sand out 1200 grit sanding marks with a polish.

What machine are you using?

[king air pilot]

Use 2000 grit ... or higher grit.

It's going to be very hard to sand out 1200 grit sanding marks with a polish.

What machine are you using

Bud,

Just got the 7424, But this is a smaller item so I will be using a fair amout of elbow grease.

Mike

[detailgod]

1000 grit sanding marks and used the IP and black EDGE 2K Wool

before



after 50/50 shot


as you can see that combo took care of 1000 grit. it should work on your 1200 grit. just follow up with a finishing polish and finishing pad