Got my samples!
Auto Detailing ForumDiscuss Got my samples! in the Auto Detailing Forums forums; Thank you Totoland Mach.
Now I have XMT 2 and 3. When I use 3 do I have to follow ...
Thank you Totoland Mach.
Now I have XMT 2 and 3. When I use 3 do I have to follow it up with 2? Or can I go to wax or sealant? What spped setting do I use on the PC 7336? Thanks.
your gonna use the PC at full tilt (5-6) with any polish. I would follow up 3 (quite aggressive) with 2 as possible. Normally I would try 1 in 2's place, but I know you dont have it currently.
Kelly: rule of thumb is start with the least aggressive product and check your results. I typically pick an area where the swirls are highly visible and start there. Let the product work, check the results, and make the decision to go more aggressive or stay with the product I'm using.
Linear Mode
