Question about which Edge 2K pad to use with Meguiars M80?

[brig2221]

I just ordered some Meguiars M80 Speed Glaze, and I have a PC 7424 with some Edge 2K 6" foam pads.

I have the White Polishing pad, Blue Finishing Pad, Green Light/Medium Cut Pad, and the Orange Heavy Cut pad.

I am curious as to what pad you think would be best suited for applying Meguiars M80 speed glaze?

All comments are greatly appreciated. Thanks!

[Truls]

Just used the MG 80 with my PC, but i used the yellow Meguiars pad and speed 6 to get my "BAD clay" scratches out.

I tryed with the orange pad, but the paint on the evo didnt like it.

Would try the blue first, then the orange if it doesnt help with the blue one

[Rsurfer]

Originally Posted by brig2221

I just ordered some Meguiars M80 Speed Glaze, and I have a PC 7424 with some Edge 2K 6" foam pads.

I have the White Polishing pad, Blue Finishing Pad, Green Light/Medium Cut Pad, and the Orange Heavy Cut pad.

I am curious as to what pad you think would be best suited for applying Meguiars M80 speed glaze?

All comments are greatly appreciated. Thanks!

All surfaces and corrections are different, so when in doubt, alway's use the least aggressive and work up til you find the right combination. This goes for polishes as well. Hope this will help you.