Quote:
|
Originally Posted by tonyspop |
If there is swirls, I can almost guarantee you'll need something stronger than XMT1 on blue.
If you have it, try XMT2 on orange. That's really about as light as you can go for correcting swirls.
Klasse AIO won't really do anything if you do it before polishing. You are literally going to be polishing off the fresh AIO. You can do AIO after polishing and before WGDG to create a very nice acrylic foundation and possibly longer life for the sealant.
You'll need to let WGDG cure for at least 12 hours (preferably 24) before doing anything. I would personally skip the VM all together for it has some cleaners in it could strip a very little of the fresh WGDG. You could potentially do VM before WGDG, but I don't know if VM has carnauba in it (I know RMG does). If VM has carnauba in it, don't use it before the sealant.
I would just top WGDG with Souveran 24 hours later.
I have the clearkote lineup that was my freegift from autogeek.(thanks again Meghan)I want to know if I have the products in the right order.The obligatory wash,maybe clay(clayed in oct.)Klasse AIO,XMT#1 for some light swirls on an edge blue pad.Now,can I use Wolfgang paint sealant then Vanilla moose hand glaze????Or will there be a bonding issue?LSP will be Souveran paste wax by hand
Linear Mode
