Need Help Asap!!
Auto Detailing ForumDiscuss Need Help Asap!! in the Auto Detailing Forums forums; Ok well I was getting ready for my first detail...i washed the car with Meguaries then clay barred it ...
Ok well I was getting ready for my first detail...i washed the car with Meguaries then clay barred it then washed it again then dried it and pulled it in my garage to be polished and waxed....
now my problem is....
I bought everything i need EXCEPT the XMT pad cleaner and conditioner...i should get both in the mail tomorrow but do i have to use the conditioner to be able to use swirl remover??
also my car has ALOT of swirls scratches etc etc and its a black car....I bought the entire XMT line along with Pinnacle liquid souveran...which pads should i use and what should i use first?
if you have any quick detailer you can mist the mad with this, the conditioner is only to reduse the amound of time of dry buf or the ammount of time it takes for the polish to spread out onto the paint and start working
as far as cleaning for light cleaning i just hose off with the garden hose for heavier cleaning i use the XMT pad cleaner
good luck with it and just remeber to work it slow and wait till it hazes (5min working at 2'X2')
Start with the least abrasive pad/polish combo to get the job done. Do a test panel and if the swirls are still there bump the polish up to a more abrasive one.
__________________ Oye como va mi ritmo bueno pa gozar
If you find the polish flashing (drying to a haze) to quickly, you will spritz the pad while damp. At first use, I use one or two spritz's on pad before starting also.
well i tried 2 parts of the hood and there are still light straight scratches...no more swirls and very few light scratches like some every inch or so.....
1st panel i tried XMT 2...then XMT 1
2nd panel i tried XMT3 .....then XMT 1
Linear Mode
