 » Autogeek Car Care Products | | |  | 
12-09-2007, 11:18 PM
|  | Senior Member | | Join Date: Sep 2007 Location: Toluca, Mexico
Posts: 274
| | | Klasse layers and Wolfgang questions
1. I just polished one of my cars with XMT 1 to remove old wax and minor swirls and used Klasse as LSP, I know you can add layers to klasse and it will add protection and gloss but don't know if it's really necessary to wait 8 to 12 hours between layers.
2. I have Wolfgang DGPS on my other car and was wondering if this sealant can be layered as Klasse with the same effects (protection and looks).
__________________ 
Last edited by Bonifax : 12-09-2007 at 11:20 PM.
|
12-09-2007, 11:24 PM
|  | Senior Member | | Join Date: Jul 2007 Location: Beavercreek, Ohio
Posts: 1,680
| | | Re: Klasse layers and Wolfgang questions
1. Bonifax you should wait at least 12 hours between the Klasse layers. It all depends on temp and humidy. But you should be fine with a 12 hour cure time.
2. Sorry I have not used it.
__________________ Thanks, Tonya  AKA twinkle toes Even a mistake may turn out to be the one thing necessary to a worthwile achievement - Henry Ford |
12-10-2007, 07:28 AM
|  | Senior Member | | Join Date: Mar 2006
Posts: 6,668
| | | Re: Klasse layers and Wolfgang questions
Quote:
Originally Posted by Bonifax  1. I just polished one of my cars with XMT 1 to remove old wax and minor swirls and used Klasse as LSP, I know you can add layers to klasse and it will add protection and gloss but don't know if it's really necessary to wait 8 to 12 hours between layers.
2. I have Wolfgang DGPS on my other car and was wondering if this sealant can be layered as Klasse with the same effects (protection and looks). | I'd wait at least 12 hours in between coats...best bet for finicky sealants like Klasse SG would be 24 hours...
__________________
1995 Nissan 240 SX SE green metallic (sold)
2000 Acura 3.2 TL white (sold)
2005 Acura RL Desert Mist (weekend toy)
1999 Infiniti I30t white (daily driver)
1997 Acura 3.2 TL (sold)
2004 BMW 325 Ci jet black(wife's car).
|
12-10-2007, 08:39 AM
|  | Senior Member | | Join Date: Sep 2007
Posts: 127
| | | Re: Klasse layers and Wolfgang questions
For any noobs reading this thread they are talking about Klasse Sealant. Klasse AIO cannot be layered as it is a cleaner. |
12-10-2007, 10:23 AM
|  | Senior Member | | Join Date: May 2007 Location: belton,tx
Posts: 1,446
| | | Re: Klasse layers and Wolfgang questions
Quote:
Originally Posted by MoBenzOwner For any noobs reading this thread they are talking about Klasse Sealant. Klasse AIO cannot be layered as it is a cleaner. |  ... layering AIO's is pointless... although it does protect, if you keep doing the same process, the cleaners are what effect the paint first and as it settles the protection comes in. If using an AIO, lay that down first. I wouldn't always wait 12 hrs, as it's not a true sealant, then top with WG DGS... which WG is more for looks than protection. The Surf City Nano seal is supposed to set up within 20 minutes before you can add something else on top of it.
__________________ "When life hands you lemons, make faces at it!" (my boy) |
12-10-2007, 11:03 AM
| | Senior Member | | Join Date: Sep 2007 Location: Toluca, Mexico
Posts: 274
| | | Re: Klasse layers and Wolfgang questions
Thanx guys 
So I guess the wolf DGPS can be layered also right?
Today I applied a second layer of Klasse sealant and believe me it continues to pop the finish, very plastic, but I like it.  sorry I didn't mention it was "klasse sealant" at the beginning of the thread.
__________________ |
12-10-2007, 11:17 AM
| | Senior Member | | Join Date: Jun 2007 Location: Atlanta, GA
Posts: 902
| | | Re: Klasse layers and Wolfgang questions
Yes, WG DGPS can be layered, in my experenience it doesn't add much, I usualy do 2 layers to insure full even coverage. Then if you want to add a little something, top it with Souveran... WOW! |
12-10-2007, 11:59 AM
|  | Senior Member | | Join Date: Mar 2006 Location: Southern NH
Posts: 1,644
| | | Re: Klasse layers and Wolfgang questions
Quote:
Originally Posted by makdaddy626 Yes, WG DGPS can be layered, in my experenience it doesn't add much, I usualy do 2 layers to insure full even coverage. Then if you want to add a little something, top it with Souveran... WOW! | Anything over 2 layers of a sealant within, lets say 1 month, is pointless and a waste of time and product, IMO. |
12-10-2007, 02:38 PM
| | Senior Member | | Join Date: May 2007 Location: belton,tx
Posts: 1,446
| | | Re: Klasse layers and Wolfgang questions
Quote:
Originally Posted by budman3 Anything over 2 layers of a sealant within, lets say 1 month, is pointless and a waste of time and product, IMO. |  the sealant has to have something to bond with... 2 layers will ensure complete coverage... top with your favorite wax for the extra durability and the shine/depth factor. If you put on too many coats it'll just wash off or whatever.
__________________ "When life hands you lemons, make faces at it!" (my boy) | |
| Thread Tools | | | | Display Modes |  Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
| | » Popular Product Links | | | | » December 2008 | | S | M | T | W | T | F | S | | 30 |
1
|
2
|
3
|
4
|
5
|
6
| |
7
|
8
|
9
|
10
|
11
|
12
|
13
| |
14
|
15
|
16
|
17
|
18
|
19
|
20
| |
21
|
22
|
23
|
24
|
25
|
26
|
27
| |
28
|
29
|
30
|
31
| 1 | 2 | 3 | |
