Ironx bleeding hours later

[aalbs]

It's now been 4 hrs since I applied Ironx to my wifes car and followed it with an insane amount of water to flush it out of the trim but it is still bleeding from two spots on the trim. I can't possibly force more water into the area than I already have. Any tips to stop the bleeding?

[Mike.Phillips@Autogeek]

Tourniquet?

Oops... I'm sorry, bad joke.


A real suggestion...
Maybe try drying the car around the block a few times to sling out excess product via centrifugal force and then re-rinse.

Repeat if it's still an issue...


Another option, try blowing are in troubled areas and then try the above?

[BobbyG]

Originally Posted by aalbs

It's now been 4 hrs since I applied Ironx to my wifes car and followed it with an insane amount of water to flush it out of the trim but it is still bleeding from two spots on the trim. I can't possibly force more water into the area than I already have. Any tips to stop the bleeding?

Is the trim rusted or is the trim held on with a mechanical fastener from behind?

[Flash Gordon]

Better do something; or your car will bleed to death

[Chris's FX4]

What kind of car is it?

[FUNX725]

Originally Posted by Chris's FX4

What kind of car is it?

And...

What kind of trim?



Bob

[Flash Gordon]

Try jamming some gauze up in there

[mwoolfso]

Picture?

Sent from my DROID3 using Tapatalk 2

[Flash Gordon]

Originally Posted by mwoolfso

Picture?

Sent from my DROID3 using Tapatalk 2

I'm afraid we lost the patient...

[tommyt53]

Try a leaf blower.