Need some feedback either use SRP or Poli-seal

[aRYip]

This is my first post on Autogeek, lets say a quick hello.

I want to detail my car next week, after search and search, seem most of the people like to seal the paint and wax it as LSP
So far I have clay, and Zymol Glasur now, but no polish or sealant product, so now I have to find which one fit my need

I narrow down to this process, everything will be done by hand, no PC

Clay it and OPT Poli-Seal it, then wax it
For this choice, I think OPT Poli-seal is one step AIO product, it polish/hide swirl and sealant the paint at the same time. So all I need to buy is OPT PS.

Before this, I was thinking using Autoglym SRP, but after search found out SRP is more filler that hide swirls, and it has very less sealant ability.

Do you guys think this is a good choice or any other option?
I was told should use Scratch X and follow by SRP then wax.

My car has some light swirls, not too bad.

[Da Fats]

buy a DA

[ScottB]

The AIO products already also include some protection in them, so you dont have to recoat with another wax unless desired. These products are best for those without buffers and really only want basic paint cleaning and protection. If thats the choice then Pinnacle XMT360 or Optimums Poly-seal is indeed the way to go.

If you dont want to polish by machine, and want to use your LSP. Then consider a paint cleansing lotion like Pinnacle or P21S. Then you essentially have a two-step system that at least specializes in the two areas.