Thanks: 0
Likes: 0
Dislikes: 0
-
Newbie Member
Blow Drying Instead of Hand Drying
I would never consider blow drying my car. Really bad idea.
I'll tell you why. There was a recent documentary on SciTech TV that took a look at these products. Kind of a "Myth Busters" type of show.
They showed that using a blower to dry a car is similar to sand blasting it. The units take in minute particles and blast them against your paint. Using a microscopic view, they showed that over time, it will damage the surface of the veicle.
Granted, some of the newer systems have nice filteration on them, but it still will not remove every minute particle that can get through.
I am not willing to take that chance and still stick to the using my good microfiber towels.
-
Super Member
Re: Blow Drying Instead of Hand Drying
If the particles are in the air, wont they settle on your finish and if you wipe them with a MF you cause swirls? I like the blower for speed and getting water out of all kinds of places you cant reach with a MF.
'Cause there's just something women like about a pickup man.
Rich
-
Super Member
Re: Blow Drying Instead of Hand Drying
Could you give us a link to the video or tell us the brand they tested?
:dancebanana:
Sky's the Limit Car Care
-
Super Member
Re: Blow Drying Instead of Hand Drying
Originally Posted by Tank_McNamara
I would never consider blow drying my car. Really bad idea.
The Metro units have a filter on the intake unlike the typical leaf blower.
-
Newbie Member
Re: Blow Drying Instead of Hand Drying
Good point about the particles settling on the surface. I think the lesser evils of the 2 is the MF
Also, as we all know after owning our vehicles for a while, I know exactly where the water settles in hard to reach places. After washing, I will use my trusty Sears 6 HP shop vac (that thing will take off my shirt if I am not careful) and hit those spots first.
Then dry with MF.
When completed, I drive the car around the block and touch up the last remaining water that only comes out from driving.
-
Super Member
Re: Blow Drying Instead of Hand Drying
Originally Posted by Tank_McNamara
Good point about the particles settling on the surface. I think the lesser evils of the 2 is the MF
If particles are settling on the paint and you wipe them with a microfiber without using something like detailing spray this cannot be good either.
-
Super Member
Re: Blow Drying Instead of Hand Drying
Originally Posted by Tank_McNamara
I think the lesser evils of the 2 is the MF
Well, if it was true that a high quality blower with a proper filter would sandblast your paint then everybody would agree. But I haven't seen any proof of that yet. You are making a claim that all blowers will sandblast your paint based on a video that probably tested one brand. If you could provide a link to that it would be helpful to those of us that are considering spending a good deal of money on a quality blower.
:dancebanana:
Sky's the Limit Car Care
-
Newbie Member
Re: Blow Drying Instead of Hand Drying
I am looking for that video. You are probably right that it was based narrow research. I have a friend who as an AirShammy that he uses on his Harley and he loves it.
I am still convinced that air drying is not the way to go. Those could quickly turn a small chip into a huge problem and logically, the "particle blasting" concept has some validity to it. Video or not.
That is what forums are all about. Sharing ideas and thoughts.
-
Super Member
Re: Blow Drying Instead of Hand Drying
Well, driving through the desert while it's windy is pretty much the same thing. Driving and hitings bugs and dust too. Granted, the bugs and dust aren't moving at 140mph, but the point stands. I recently started using a blower and I personally love it. I don't think I'm doing that much damage to the paint.
Kyle
Originally Posted by Dugdug
Anyways, a customer with a hummer asked me if there was a surcharge for his hummer. I said yes, it's an SUV. He said quote "well it's an H3, so it's not really an suv".......
-
Super Member
Re: Blow Drying Instead of Hand Drying
The microfiber would definitely be worse in this case. Also, mind you, the car has water on it. The microscopic particles would be hitting, a majority of the time, water instead of paint, and then shedding off of the car just as a rinse down. Dragging a microfiber over these microscopic particles and making longer scratches in the paint can not possibly be better.
I believe the safest route is to blow dry, 2nd place being using a microfiber and the BLOT method, not the wipe method.
2009 Summit White Cobalt SS/TC SOLD
2007 Black Cobalt LT - Daily Driver
Similar Threads
-
By Route246 in forum Auto Detailing 101
Replies: 16
Last Post: 05-12-2018, 09:09 PM
-
By prr in forum Auto Detailing 101
Replies: 11
Last Post: 12-01-2016, 07:02 AM
-
By Harry Da Hamster in forum Auto Detailing 101
Replies: 40
Last Post: 09-17-2016, 03:22 AM
-
By octane in forum Auto Detailing 101
Replies: 26
Last Post: 11-12-2012, 04:26 PM
-
By viviorunitia88 in forum Auto Detailing 101
Replies: 22
Last Post: 08-20-2010, 09:47 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks