Long Term Test - 3M Perfect-it Show Car Paste Wax

**boogiejoe** · 02-23-2008, 05:45 PM

This is a long term test of 3M Perfect It Show Car Paste Wax. It was applied to a Ford Escape, which is a daily driver. The paint has some imperfections, which will hopefully simulate realistic conditions. The test was started 11/23/2007.

I recently purchased a can of 3M Perfect It Show Car Paste Wax to try it out. The wax cost me about $12.00. I like many of the other 3M products, so I thought I would give this a try.

Have more to add. Stay tuned.

Follow along at - Professional Detailer.com - Chris - 3M Perfect It Show Car Paste Wax - Long Term Test

**porta** · 02-24-2008, 05:04 PM

IMO a very good wax, how is the beading so far?

**boogiejoe** · 02-24-2008, 07:57 PM

It still beads pretty well. I've found that it sheets off most of the water, so the beading is not consistent. In spots where water is left behind, it beads quite well. It's holding up much better than I thought. I wanted to move on to test another wax, but it just keeps on working. The car is getting somewhat abused as well. I may have to do another warm weather test as well.

**tommy** · 02-25-2008, 10:16 AM

This is my favorit also it added more black on my car and gave long durability on protection

**imageautodetail** · 02-25-2008, 10:23 AM

#26 is my go to wax, may have to give the 3m a try. How would you compare it to #26

**boogiejoe** · 02-25-2008, 02:36 PM

I've not used #26 before. It's on my list to test, along with many other waxes/sealants.

**ScottB** · 02-25-2008, 06:26 PM

this wax use to be a bear to remove, any easier now ??

**zaxjax** · 02-25-2008, 06:53 PM

I used it on my Cobra and it was real difficult to remove. It made the metal flake pop though.

Thanks for sharing your results.

**tommy** · 02-25-2008, 09:30 PM

i also not used #26 before but i heard about they are similaly but not sure about this.

on my experience if compare to collinite, fourstar and p21s. 3m perfect-it a little bit to be bear to remove.

**boogiejoe** · 02-26-2008, 08:29 AM

Originally Posted by killrwheels@autogeek

this wax use to be a bear to remove, any easier now ??

It was very easy to remove. I applied it when it was cold out, though. I don't know if that had any effect on it or not. I let the wax sit for about 5 minutes before removing it. It came off really easy. If they changed the forumla of this stuff, I'm pretty sure I don't have a new can.