Menzerna SIP

[beavslu01]

Well today was rainy and cooled, nothing really to do, so i decided to try out the new yellow Edge pad i got the other day on the Fairlane. I last polished this car in the summer with Pinnicale XMT line, it had, i guess you say, moderate swirls on the paint, but i think this car had a hard clear on it. I had also got some PB SS3 mostly because i don't have alot of space in the garage to work in, so i have to polish outside and figured i'll give it a try. I tryed the PB with the yellow pad and left alot of mirco maring on the paint. So i went to to the SS2.5 with the blue pad and still had alittle maring on it, so i tryed the SIP with the yellow and SIP, worked in for about 3-5 min. and WOW! Im not as highly skilled as some of you out their, but to me after the SIP it seemed that i would be able to go strait to waxing. Got to say that this stuff was worth it.

Picture with some of the swirls if you can see them, but they are their (bad lighting).


Picture after the SIP.

[lethalxls1]

Follow up with the Nano and a finishing pad- it should look even better.

[budman3]

The SSR3 is pretty much liquid sandpaper, a very strong professional product. It needs ample time and friction to have the product properly breakdown. I've used it with a PC to remove sanding marks a few years ago... it's almost too strong to use, IMO. I definitely would save it for very neglected surfaces. All that matters is that you got the results you are looking for. Looks good.

[wytstang]

SIP=God send

[BMSPEED]

sip followed w/ nano is a great combo, can't go wrong!

[justin_murphy]

Originally Posted by budman3

All that matters is that you got the results you are looking for. Looks good.

Very well put!!!

This is all that matters. No need for multiple steps.....unless you WANT to.

[Excessive Detail]

Looks good cus, thats the wagon isn't it, I just got my SIP in, can't wait to use it, did you order any nano, if not, when I get back I'll bring some over.

Originally Posted by beavslu01

Well today was rainy and cooled, nothing really to do, so i decided to try out the new yellow Edge pad i got the other day on the Fairlane. I last polished this car in the summer with Pinnicale XMT line, it had, i guess you say, moderate swirls on the paint, but i think this car had a hard clear on it. I had also got some PB SS3 mostly because i don't have alot of space in the garage to work in, so i have to polish outside and figured i'll give it a try. I tryed the PB with the yellow pad and left alot of mirco maring on the paint. So i went to to the SS2.5 with the blue pad and still had alittle maring on it, so i tryed the SIP with the yellow and SIP, worked in for about 3-5 min. and WOW! Im not as highly skilled as some of you out their, but to me after the SIP it seemed that i would be able to go strait to waxing. Got to say that this stuff was worth it.

Picture with some of the swirls if you can see them, but they are their (bad lighting).


Picture after the SIP.

[beavslu01]

I kind of wish i got the nano instead of the final polish. Thats not the wagon that the two hard top. So i need to finish up the nano and what kind of pad, white?

[ASPHALT ROCKET]

I would suggest to follow up with 106ff, 85rd, or ultrafina se.

[zaxjax]

You will like Final Finish. I have both and depending on the color and how much I get paid determines if Nano is used.